For your "one-stop shopping convenience", we carry everything
needed for a complete computer controlled model railroad.
Item Description Part # Price
Supply
Each CTI module requires 9 to 12 Volts D.C.
You may supply your own power source, or use ours.
This is a low-cost 9 Volt 200 milliAmp U.L. approved power supply, capable of powering
a single CTI board.
Supply
A larger 9 Volt 1 Amp supply capable of powering 5 or more CTI boards.
The economical way to power your entire CTI network. (U.L approved.)
Cables
Used to connect CTI modules to your PC.
These are standard 4-conductor modular phone cords, also available at any
electronics or home-supply store.
One cable is required per board.
(6 feet)
(12 feet)
(24 feet)
Auxiliary Relay
Plain & simple - a 10 Amp capacity SPDT relay, conveniently
mounted on a printed circuit card with easy-to-access
screw terminals. When a Train-Brain relay isn't available, the
aux relay allows a Switchman, YardMaster or Signalman-IC output
to control virtually anything; AC or DC up to 120V @ 10 Amps.
Switch Machine
Diodes
Great for use as "sneak path" snubber diodes in switch machine
circuits (see the CTI User's Guide for circuit schematics).
Note: Sold only in multiples of 16
(per pack of 16)
Capacitors
Great for use as charge/discharge timing elements in switch machine
circuits (see the CTI User's Guide for circuit schematics).
Note: Sold only in multiples of 8
(per pack of 8)
Power Supply
A 12 Volt 1.5 Amp U.L. approved supply that's great for powering switch machine circuits
(see the CTI User's Guide for circuit schematics).
(Note: For powering your CTI modules, we recommend using the 9 Volt supplies TB002-A and TB002-B)
Jump back to main catalog page.
Previous catalog page.
Next catalog page.
Voice: (410) 882-8384
Fax: (410) 882-8393
info@cti-electronics.com
PO Box 9535 Baltimore, MD 21237